Skip to main content

Diable ipv6 on linux???

I found this on ubuntuforums. It's about disabling ipv6 on ubuntu but should apply to every distros. Here is how to..

Make your /etc/modprobe.d/aliases look like this.
alias net-pf-8 atm
alias net-pf-9 x25
# 1, 2, 3 new lines
alias net-pf-10 ipv6 off <<-- add
alias net-pf-10 off <<-- add
alias ipv6 off <<-- add
#alias net-pf-10 ipv6 >>===comment the original line out
alias net-pf-11 rose
alias net-pf-12 decnet

Anyway the method above doesn't work for me. After changing,reboot ifconfig output still had an ipv6 address and "ip a | grep inet6" output told me samething. To diable[on my machine] I change "alias net-pf-10 ipv6" to "alias net-pf-10 off ipv6"[like snowx1000 does] and ipv6 address will not show anymore.
The more importance is why disable ipv6
The idea is they want to make a connection to destination faster. Someone say apps will first attempt a connection on IPv6. When this fails, they'll then switch to IPv4. It's this first attempt that causes the delay. Remmeber that it can't increase bandwidth after the connection is made. It's may reduce the time it takes to connect. But manyone said they feel they can download faster[that's impossible for me :P]. So, it's up to you. If you have a hard time to make connection to any website and disabling ipv6 make it better, you should diable it.

Comments

Unknown said…
Had the same problem with the original howto and Xubuntu 8.04 alpha 6. Your tip of moving 'off' to before the 'ipv6' worked. Thanks for the help.

Why disable ipv6? My router, much like me, is old, ignorant, and doesn't understand these new addresses. I'll eventually figure them out but the router is hopeless. Until I invest in a newer one, there is no point in having software waste time attempting to make a connection that has a zero chance of completion.

Popular posts from this blog

Fixing sendmail take a long time to start

I notice that my database box[FC6+Oracle10.2] take along time to startup. Sendmail and sm-client very very slow to start[ about 5 minutes ]. There's something wrong in /etc/hosts file. 'newalises' command take long time to update and finish with error below. [root@ora10g ~]# newaliases WARNING: local host name (ora10g) is not qualified; see cf/README: WHO AM I? /etc/aliases: 76 aliases, longest 10 bytes, 765 bytes total [root@ora10g ~]# cat /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost 192.168.1.55 ora10g [root@ora10g ~]# To fix this, custom hostname[ora10g] need to append to localhost line in /etc/hosts. [root@ora10g ~]# cat /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost ora10g 192.168.1.55 ora10g [root@ora10g ~]# newaliases /etc/alia

Too many open files

Last week tomcat log file report many error about "Too many open files" when it has high traffic. Some in catalina_log say 2007-04-07 16:13:40 HttpProcessor[80][272] Starting background thread 2007-04-07 16:13:40 HttpConnector[80] accept: java.net.SocketException: Too many open files and here is from localhost_log 2007-04-07 16:13:40 StandardWrapperValve[myservlet]: Servlet.service() for servlet myservlet threw exception java.io.FileNotFoundException: /home/log/mylog_070407.log (Too many open files) This is because too many file descriptors're opened by tomcat. File descriptor can be limited in both system level and shell level. To check maximum number of fd in system type 'cat /proc/sys/fs/file-max'. In my case it is 65536(someone said it should set to 200000). Tomcat error when try to open socket number 272 so I think 65536 is ok for me for now. Anyway if u want to set it add 'fs.file-max = 200000' to /etc/sysctl.conf pnix@pnix-a7:~$ cat /proc/sys/fs/fil

Setup MySQL with Ofbiz

Download ofbiz weekily build and extract it somewhere you want. From your ofbiz directory, edit file entityengine.xml in framework/entity/config add new datasources below localmysql datasource part <datasource name="custommysql" helper-class="org.ofbiz.entity.datasource.GenericHelperDAO" field-type-name="mysql" check-on-start="true" add-missing-on-start="true" check-pks-on-start="false" use-foreign-keys="true" join-style="ansi-no-parenthesis" alias-view-columns="false" drop-fk-use-foreign-key-keyword="true" table-type="InnoDB" character-set="latin1" collate="latin1_general_cs"> <read-data reader-name="seed"/> <read-data reader-name="seed-initial"/> <